New products

A compact antenna adapter for quickly changing the connector standard in radio installations. The component is equipped with an SMA male plug and SMA-RP female socket, providing wave matching with 50 ohm impedance. Precise construction, gold-plated finish and teflon insulator guarantee low signal loss and durable connection.

The adapter is widely used in Wi-Fi routers, access points, SDR receivers, FPV video systems and industrial telemetry devices.

A complete set of 20 linear potentiometers in a convenient box. The set includes 10 common resistance values ranging from 1k to 1M. These linear-characteristic components are designed for THT mounting and come with matching 6-mm-shaft adjustment knobs. This set is ideal for prototyping, building analog circuits, and control applications in projects using Arduino, ESP8266, and ESP32 platforms.

The WaveShare SN65HVD230 compact CAN communication module allows microcontrollers to be connected to the CAN bus. The module is powered by 3.3 V, features built-in ESD protection, and is compatible with the PCA82C250 transceiver.

The module is used in industrial automation, building automation, vehicles, and robotics. It ensures reliable data transmission and works with platforms such as ESP32, Arduino, ESP8266, and Raspberry Pi.

The compact ESP32-C3 Super Mini prototype board features a powerful 32-bit RISC-V processor and a built-in 0.42-inch OLED display. The module provides reliable Wi-Fi and Bluetooth 5.0 LE connectivity with minimal power consumption. It offers 4 MB of FLASH memory and a wide range of interfaces, including 11 GPIO pins. It is ideal for IoT projects, automation, miniature weather stations, and wearable devices. It guarantees full compatibility with popular development environments, such as the Arduino IDE and ESP-IDF.

This high-quality N-female to N-female adapter from RF Connectors is designed for installation in hermetic SEAL-type enclosures. It ensures a precise fit and excellent transmission performance at 50 ohms impedance, effectively minimizing signal loss in the radio path.

The adapter is used in radio communication systems, base stations, measurement equipment, and amateur radio installations. It features high mechanical durability, and the included sealing O-ring and set of accessories ensure a stable and secure installation.

The RP-SMA to SMA right-angle adapter enables seamless connection of devices equipped with a male RP-SMA connector and a female SMA connector. The right-angle design facilitates cable management in tight spaces and effectively protects cables from kinking.

This adapter is used in Wi-Fi routers, access points, FPV systems in drones, and IoT projects utilizing Arduino, ESP32, or Raspberry Pi modules. It ensures stable signal transmission and simple, tool-free installation.

The PT100 temperature sensor is a precision resistance thermometer in a steel housing, providing a measurement range from -50°C to 200°C. It features a 3-wire connection and a 100-cm-long silicone cable, ensuring high accuracy and easy installation. With an IP65 protection rating, it is resistant to moisture and damage. It is ideal for building automation, HVAC systems, and projects using Arduino or ESP32.

This industrial USB-to-RS485 converter, based on the CH340 chip, enables stable data transmission over distances of up to 1,200 m. The device, equipped with convenient screw terminals, offers transmission speeds ranging from 600 to 115,200 bps. It is widely used in industrial automation, Modbus protocol support, PLC diagnostics, and sensor data reading. The module is compatible with Arduino, ESP32, ESP8266, and Raspberry Pi platforms.

The PCM5102A digital-to-analog converter module converts a digital I2S audio signal into high-quality stereo analog audio. The chip supports resolutions up to 32 bits and sampling rates up to 384 kHz. The board is equipped with a 3.5 mm jack and operates on a 3.3 V to 5 V power supply.

The product is compatible with ESP32, Raspberry Pi, and Arduino. It is used in DIY music player projects, internet radios (including the yoRadio project), and IoT audio notification systems.

The compact SFM-20B piezoelectric buzzer is an efficient piezo buzzer that generates a continuous acoustic signal with a volume above 95 dB. The module is powered by 3-24V DC and features low current consumption of around 10 mA. This universal buzzer works excellently as an audible indicator for alarm systems and industrial devices. It is ideal for DIY projects and circuit prototyping with Arduino or Raspberry Pi microcontrollers.

The advanced EBYTE E220-900T22D LoRa radio module with the LLCC68 chip enables stable long-range data transmission in the 868–915 MHz band. The device offers a range of up to 10 km, high resistance to interference, and low power consumption. Communication with microcontrollers takes place via a simple UART (TTL) interface.

The product is used in IoT systems, telemetry, and home and industrial automation. It is fully compatible with the Arduino, ESP32, and Raspberry Pi platforms.

This high-quality, screw-on 50 Ω male N connector is designed for installation on RF-5 and H155 Flex cables with a diameter of up to 5.8 mm. The nickel-plated brass body and silicone gasket protect the connection, while the gold-plated soldered pin and Teflon insulator ensure low signal loss. The connector is ideal for use in radio communication installations, antenna systems, and RF measurement equipment.

The compact AS5600 module is a high-precision magnetic encoder with 12-bit resolution. It provides contactless angle measurement in the range of 0–360 degrees, eliminating the problem of mechanical wear. Communication takes place via the I2C or PWM interface with a 3.3 V power supply. The sensor is ideal for demanding applications—such as precise positioning of robot arms, controlling BLDC motors, and advanced industrial automation. The kit includes a dedicated magnet required for the system to function.

The SX1276 868 MHz LoRa module is an advanced, energy-efficient radio chip that provides long-range communication for IoT projects. The device operates in the 868 MHz band, using a standard SPI interface and 3.3 V logic. It features very high receiver sensitivity and low power consumption. The module is ideal for wireless sensors, autonomous weather stations, telemetry systems, and smart home installations. A matching antenna is included in the kit.

The compact ESP32-S2 mini S2FN4R2 microcontroller with built-in Wi-Fi support is a powerful successor to the Wemos D1 mini. It features a high clock speed of 240 MHz, 4 MB of FLASH memory, 2 MB of PSRAM, and a modern USB-C connector. The module provides 27 I/O pins and popular communication interfaces.

The chip ensures full compatibility with MicroPython and the Arduino IDE. It is ideal for Internet of Things (IoT) projects, home automation systems, wireless environmental sensors, and prototyping advanced electronics.

This high-quality UHF barrel-type antenna connector enables a stable connection between coaxial cables terminated with UC-1 plugs. The product features a compact design with a length of 24.8 mm and durable Teflon (PTFE) insulation, ensuring excellent electrical performance and high thermal resistance.

The dual SO-239 connector is used in CB radio installations, amateur radio systems, and commercial radio networks, ensuring a reliable connection in confined spaces.