OEM

The MT3608 DC-DC Step-Up converter module is an efficient solution that boosts voltage from 2-24 V to 5-28 V. The circuit offers a maximum output current of 2 A and high efficiency of 95%. Thanks to its compact size, the module is ideal for small portable projects and IoT systems.

The device works well with popular platforms such as Arduino, Raspberry Pi, and ESP32. It performs excellently when powering sensors, communication modules, and in hobby robotics, allowing you to power circuits from a single Li-Ion cell.

NE555 Pulse Generator Module is a versatile device that generates square-wave signals in the range from 1 Hz to 200 kHz. It has two potentiometers for precise adjustment of frequency and duty cycle. The module is powered from 5-15 V and works well in projects with Arduino or Raspberry Pi.

Thanks to jumper-selectable operating ranges, the circuit is well suited for testing digital circuits, controlling stepper motors, and generating clock pulses. Its compact design and broad compatibility make it easy to integrate with many electronic systems.

The NE555 Regulated Arduino pulse generator module is a versatile device for hobbyists and professionals. Powered by 5-12V, it offers a single-channel output with adjustable pulse frequency via a potentiometer, reaching a maximum frequency of approximately 1.3 kHz. The output signal voltage is approximately 50% of the input voltage. The module's compact dimensions, 25 x 14 x 15 mm, make it ideal for experiments and DIY projects in electronics and robotics.

A timer module with an NE555 chip serves as a delay. When it receives power, the NE555 starts counting down the set time and then activates the relay, which remains on until the power is cut. The 12V relay can be adjusted steplessly via a potentiometer between 0-10 seconds. Without power, the relay remains off.

The OMRON SSR 5V 2-channel solid-state relay is a module ideal for controlling devices using AVR, ARM, Arduino, STM32, ESP8266 and Raspberry Pi microcontrollers. It features galvanic isolation between input and output. The specification includes 4 relay channels, 5V supply voltage, low state activation and Normal Open type contacts. The maximum load is 2A at 250V AC. This is an excellent tool for prototyping electronic circuits.

P31 liquid level sensor is a reliable float switch based on a reed switch. The device works seamlessly with platforms such as Arduino or Raspberry Pi. The module supports a maximum voltage of 100V DC and current of 0.5A. The sensor is ideal for monitoring water level in tanks and aquariums, and for protecting pumps against dry running. The kit includes a gasket and a nut, ensuring watertight mounting in a 7.5 mm hole.

PIR HC-SR501 motion sensor is a reliable module that detects changes in infrared radiation. It features a range of up to 7 meters and a 140-degree field of view. The device is fully compatible with platforms such as Arduino, Raspberry Pi, and ESP32. Thanks to low current consumption and 5-12 V power supply, it is well suited to alarm systems, building automation, and smart lighting. It has adjustable motion indication delay from 5 to 200 seconds.

The white OZY-60 solderless prototype breadboard has 400 tie points and two power rails. It enables rapid building and testing of electronic circuits without a soldering iron. The board is compatible with Arduino, Raspberry Pi, ESP8266 and ESP32 microcontrollers. Fitted with double-sided tape and clips for joining modules, it provides stable mounting. It supports a maximum current of 5 A, making it ideal for IoT projects, education and verifying schematics before soldering.

High-quality double-sided 3x7 cm PCB with 340 holes and a standard 2.54 mm pitch. Made from solid 1.6 mm thick laminate with plated-through holes, ensuring durability and reliable connections. Perfect for rapid prototyping of electronic circuits and mounting through-hole components. It serves as an excellent base for creating modules for platforms such as Arduino, Raspberry Pi, or ESP32 - without the need to design and etch your own circuits.

Double-sided PCB prototyping board measuring 5×7 cm is an ideal base for building electronic circuits. It has 432 holes on a standard 2.54 mm pitch, which makes mounting through-hole components easy. Made from durable 1.6 mm laminate, it gives your projects a stable foundation.

It is excellent for rapid prototyping and for building modules for Arduino, Raspberry Pi, or ESP32. You can test ideas without etching dedicated printed circuit boards-saving time and making your workflow easier.

Precise PT100 temperature sensor in the form of a probe with a 0.5 m cable. The probe enables measurements over a very wide range from -50°C to +450°C, and its compact dimensions 30 mm x 4 mm make installation in tight spaces easier.

The product offers high precision and stability. It is ideal for building thermostats, weather stations, and industrial automation systems. It works excellently with popular platforms such as Arduino, ESP8266, ESP32, and Raspberry Pi.

Precise PT1000 temperature sensor with a 0.5 m cable. The measuring probe supports an extreme range from -50°C to +450°C, while the cable is rated up to +200°C. Compact dimensions of 30 x 4 mm and a weight of 3 g make installation easy. The product works seamlessly with Arduino, ESP8266, ESP32, and Raspberry Pi. Ideal for automation systems, monitoring heating processes, and projects that demand high stability and measurement accuracy.

High-performance MOSFET PWM driver HW-517 enables precise control of direct current in the range 5V - 36V DC. The module offers high current capability up to 15A and maximum power 400W. The device is compatible with platforms such as Arduino, Raspberry Pi, and ESP32.

It works excellently for smooth speed regulation of DC motors, brightness control of LED lighting, and control of pumps and fans. Compact dimensions and direct compatibility with 3.3V and 5V logic facilitate integration in automation projects.

The miniature KCD1 101 rocker switch is a reliable component for simple ON/OFF applications. It offers a maximum rating of 250V AC / 6A and compact dimensions, which makes installation easier in tight spaces. It has two switching positions and two terminals. It works very well as a main power switch in projects with Arduino or Raspberry Pi. It is widely used for lighting control, consumer electronics repair, and amateur DIY projects, providing safe and reliable operation.

USB to RS485 adapter with the CH340 chip is a professional tool for communicating devices using the Modbus, Profibus, and PLC standards with a computer. The converter supports the USB 2.0 interface and works with convenient Plug & Play technology without requiring additional power. It provides stable data transmission at speeds up to 6 Mbps over distances up to 1200 m. The product is ideal for industrial automation, machine diagnostics, and integration with popular microcontrollers and measurement systems.

This set of 16 sensor modules is the perfect foundation for learning electronics and related experiments. Compatible with popular microcontrollers such as Raspberry Pi, Arduino, ESP8266, STM32 and others. Allows you to learn about different sensors and communication interfaces. Included are sensors for distance, temperature, humidity, motion detection, gases, light, vibration, sound and tilt. This is an ideal kit for electronic projects and experiments, perfect for beginners and hobbyists.

Set of 37 sensor modules sensors for: Raspberry Pi 4 Arduino ESP8266 STM ESP-01 Microcontrollers + BOX!