OEM

High-quality MTS-203 toggle switch with three ON-OFF-ON positions is a reliable solution for controlling circuits. It supports a maximum load of 250V at 3A or 125V at 6A. It has 6 solder pins for a stable connection. The kit includes washers and a nut for quick mounting.

This three-position switch is versatile and works excellently in projects with Arduino, ESP8266, ESP32, and Raspberry Pi. It is ideal for controlling motor rotation direction and switching operating modes in various electronic devices.

Precise 3D side cutters - an excellent equivalent of the PLATO 170 model. The tool has thin, flat blades and a bent tip, which allows cutting flush to the surface. It is ideal for working on PCB assemblies, electronics projects, and modeling. The maximum cutting diameter for copper wires is 1 mm. Ergonomic rubber grips ensure a secure hold, and low weight guarantees comfortable use. The set includes a blade guard cap that protects against accidental cuts.

Compact 3V DC vibration motor measuring 10x2.7mm with speed up to 11000 rpm. The module features low current draw and a built-in adhesive layer for quick mounting. It has leads for easy connection. Ideal for haptic notifications in wearables, miniature controllers, and robotics projects. Works well with popular platforms: Arduino, ESP32, and Raspberry Pi.

The 4-channel 12V 10A relay module is the ideal solution for controlling high-power devices with a microcontroller such as an Arduino. Using opto-isolation, the module protects the control circuit from interference, ensuring stable and reliable operation. Each of the four relays is triggered by a low state and can operate devices with a maximum voltage of up to 250V and a current of up to 10A. The module has built-in LEDs to indicate the status of the relays for easy diagnostics during operation.

A compact 4010 fan measuring 40x40x10 mm powered by 12V DC is a versatile solution for cooling electronics. It has a 30 cm cable with a 2-pin XH 2.54mm connector for quick installation. Standard 32x32 mm mounting hole spacing simplifies mounting. The product works well for cooling 3D prints, power circuits, stepper motors, and mini computers such as Arduino or Raspberry Pi. It effectively improves circuit stability in small enclosures.

Sturdy 40mm fan guard with dimensions 40x40mm and standard mounting hole spacing of 32mm. Made from durable materials, it provides effective protection for rotor blades against mechanical damage and helps prevent wires from being drawn in. The product is fully compatible with most 40mm fans. It works excellently as cooling protection in computer cases, 3D printers, power supplies, and electronic projects such as Raspberry Pi, ensuring safe operation of devices.

Compact 4S Li-Ion/Li-Po battery charge level indicator with a clear 4-bar LED display. Enables accurate voltage monitoring from 13.2 V to 16.8 V. The module is powered directly from the measured source, which simplifies installation.

The device works well in RC models, drones, portable audio systems, and power tools. Thanks to its small size and contrasting colors, it provides instant readout of power status in DIY projects and emergency systems.

A compact holder for four 18650 cells delivering 14.4 V output via series connection. It has attached wires and spring contacts for fast assembly and stable power. This durable battery holder is ideal for DIY projects, robotics, and IoT systems. It is an excellent power source for microcontrollers such as Arduino, ESP32, or Raspberry Pi, ensuring reliable operation and safety.

High-quality double-sided PCB prototyping board measuring 4x6 cm with a thickness of 1.6 mm. It features 280 plated-through holes on a standard 2.54 mm pitch, ensuring versatility and ease of soldering. It is an ideal solution for rapid prototyping, building expansion modules, and testing electronic circuits. The board is fully compatible with popular platforms such as Arduino and Raspberry Pi. It saves time by eliminating the need to design dedicated printed circuit boards.

Compact 5V noise and sound sensor with a built-in capacitive microphone and a potentiometer for precise sensitivity adjustment. It has a digital output and dimensions of just 32 mm x 15 mm. The module is ideal for Arduino, ESP8266, or Raspberry Pi.

The sensor works excellently in smart lighting projects controlled by sound, alarm systems that react to noise, and interactive installations. It offers simple integration and reliable detection of sudden sounds-for example, clapping.

A practical 6x AA battery holder is an ideal solution for powering electronic circuits, including popular Arduino platforms. Batteries connected in series produce a stable 9V voltage. The product features an integrated 16 cm cable terminated with a universal DC 5.5x2.5 mm plug. A sturdy housing with strong springs ensures secure cell retention. Compact dimensions make it easy to mount in portable projects, robotics, and emergency backup power systems.

Universal double-sided PCB prototype board measuring 6x8 cm with a laminate thickness of 1.6 mm. It has 594 holes on a standard 2.54 mm pitch, which makes mounting through-hole components easier. It is an ideal solution for quickly building electronic circuits without having to design printed circuit boards. The board works very well in projects using popular microcontrollers such as Arduino, Raspberry Pi, or ESP32. It offers high durability, saves time, and is convenient when testing new circuit ideas.

Eight-channel 12V relay module lets you control high-power devices using platforms such as Arduino, Raspberry Pi, or ESP32. The module supports a maximum load of 10A. Switching is performed with a low (LOW) level. Each channel has optical isolation for control circuit safety and LED diodes indicating operating state.

The device is well suited to building automation for controlling lighting, switching motors and pumps, and managing heating elements and solenoid valves in advanced microcontroller projects.