Assembly electronics

The set includes 40 pieces of male-female wires 20 cm long. They enable quick connection of modules to controllers without soldering. The jumper wires are ideal for building prototypes and testing electronic circuits.

The wires offer broad compatibility with popular platforms such as Arduino, Raspberry Pi, ESP8266, and ESP32. They work well when connecting sensors, displays, or relays directly to GPIO pins, greatly simplifying and speeding up project assembly.

The set includes 40 universal jumper wires 20 cm long with male-to-male ends. The jumpers enable instant connection of electronic components without soldering. They are ideal for projects based on Arduino, Raspberry Pi, and ESP8266 and ESP32 modules.

The ribbon can be easily split into individual wires, which helps organize connections. The product is indispensable when connecting sensors, displays, or relays to breadboards and GPIO connectors. It enables convenient, repeatable circuit prototyping.

Set of 10 color-coded wires with spring clips is an ideal solution for SALEAE logic analyzers. Each cable is 24 cm long and ends with a female DUPONT connector and an insulated grabber. A strong spring ensures stable contact, while the retractable mechanism minimizes the risk of short circuits.

These wires work very well for measuring digital signals and diagnosing I2C, SPI, and UART buses. The product is compatible with Arduino, Raspberry Pi, ESP8266, and ESP32 platforms, making safe prototyping easier.

The MB-102 solderless breadboard with 830 tie points is an ideal solution for quickly building electronic circuits without soldering. It offers four power rails and works well with popular microcontrollers such as Arduino, Raspberry Pi, and ESP32.

It comes with factory double-sided tape and clips for stable mounting and joining boards into larger working modules. It is widely used in education, sensor testing, and designing circuits for robotics.

The compact Micro USB 5 PIN socket on a PCB provides full access to all signal and power lines. The module, measuring 15 x 14 mm, has 3.5 mm mounting holes that ensure mechanical stability. The product is ideal for prototyping electronic circuits, powering microcontrollers at 5V, and repairing damaged ports. Ready solder pads make it easy to integrate with projects based on Arduino, ESP8266, or Raspberry Pi, saving time during assembly.

The white OZY-60 solderless prototype breadboard has 400 tie points and two power rails. It enables rapid building and testing of electronic circuits without a soldering iron. The board is compatible with Arduino, Raspberry Pi, ESP8266 and ESP32 microcontrollers. Fitted with double-sided tape and clips for joining modules, it provides stable mounting. It supports a maximum current of 5 A, making it ideal for IoT projects, education and verifying schematics before soldering.

High-quality double-sided 3x7 cm PCB with 340 holes and a standard 2.54 mm pitch. Made from solid 1.6 mm thick laminate with plated-through holes, ensuring durability and reliable connections. Perfect for rapid prototyping of electronic circuits and mounting through-hole components. It serves as an excellent base for creating modules for platforms such as Arduino, Raspberry Pi, or ESP32 - without the need to design and etch your own circuits.

Double-sided PCB prototyping board measuring 5×7 cm is an ideal base for building electronic circuits. It has 432 holes on a standard 2.54 mm pitch, which makes mounting through-hole components easy. Made from durable 1.6 mm laminate, it gives your projects a stable foundation.

It is excellent for rapid prototyping and for building modules for Arduino, Raspberry Pi, or ESP32. You can test ideas without etching dedicated printed circuit boards-saving time and making your workflow easier.

A complete set of 600 through-hole resistors rated at 0.25W with a precise 1% tolerance. The pack includes 30 different resistance values, 20 pcs of each. It is an essential workshop item, ideal for prototyping electronic circuits on breadboards. The product works great in projects for Arduino, for ESP32, for ESP8266, and for Raspberry Pi. It enables voltage dividers, LED current limiting, and pull-up/pull-down of signal lines.

A set of 140 jumper wires for breadboards is the ideal solution for rapid prototyping of electronic circuits. Wires with a 22AWG cross-section and tinned ends ensure reliable connections. They are compatible with Arduino, Raspberry Pi, ESP8266, and ESP32 platforms. The kit includes wires in various lengths from 2.5 mm to 127 mm, making it easier to build neat IoT projects. Everything comes in a practical compartment organizer that simplifies storing and sorting the parts.

High-quality single-sided prototype PCB board measuring 5x7 cm with laminate thickness 1.6 mm. Features 432 solder pads on a standard 2.54 mm pitch. Enables rapid prototyping, circuit testing, and building custom expansion modules without having to etch dedicated printed circuits.

The board is fully compatible with Arduino, ESP8266, ESP32, and Raspberry Pi platforms. Offers huge time savings, high mechanical durability, and easy modification of connections in a wide variety of electronic and educational projects.

USB-A 2.0 4-pin male plug on PCB is a versatile solution for projects with Arduino, ESP32, and Raspberry Pi. The module has pins at the standard 2.54 mm pitch, which simplifies mounting on breadboards. It provides access to the 5V supply line, ground, and data lines. It is ideal for powering your own circuits, prototyping devices, building custom adapters, and repairing cables. Two mounting holes ensure stable mounting in DIY enclosures.

The compact USB-C to USB-C (male-to-male) coupler is a universal solution for modern devices. The adapter has two male plugs and supports the Power Delivery up to 100W standard, providing rapid charging for laptops, tablets, and smartphones. The product enables stable data transfer and high-quality image and video transmission to external monitors. It also allows direct connection of devices equipped with female ports. This versatile accessory combines power, data, and video signal in one.

The set includes 65 colourful male-to-male jumper wires with lengths from 12 cm to 24 cm. The cables have a standard 2.45 mm pitch and are used for quick connection of breadboards and electronic modules without soldering. The jumpers are fully compatible with popular platforms such as Arduino, Raspberry Pi and ESP32. Different colours and lengths make it easy to identify connections and keep things organised when prototyping circuits and creating IoT projects.

This USB-A male adapter with a 4-pin screw terminal lets you build custom USB connections quickly without soldering. Wires attach via screw clamps. It has a detachable terminal block and clearly marked pins. Ideal for prototyping, cable building, and powering circuits. Fully compatible with microcontrollers such as Arduino, ESP8266, ESP32, and Raspberry Pi.