Menu
- Minicomputer(81)
- Microcontroller(89)
- Electronic(531)
- Cooling(22)
- Sound and acoustics(11)
- Minicomputers(3)
- Memory cards and disks(6)
- Enclosures(8)
- Sensors(58)
- Voltage regulators(42)
- Assembly electronics(79)
- Programmers(12)
- Displays and screens(28)
- Buttons and keys(23)
- Starter kits(8)
- Diodes(8)
- Converters(29)
- Power supply(60)
- Gadgets(1)
- LED lighting(12)
- Relays(25)
- GSM modules(4)
- Motor and servo controllers(14)
- Communication(63)
- Servo(5)
- Smart Home(2)
- Services(0)
- New products
20-cm Pigtail: N-type socket with flange, SMA-M RF plug, 50 Ohm RG316 high-frequency cable
High-quality RF pigtail with a 20-cm RG316 coaxial cable and 50-ohm impedance. One end features an N-type connector with a 4-screw flange for secure mounting on an enclosure, while the other end has a standard SMA plug. The product ensures reliable signal transmission with low loss. It is ideal for use in radio communication devices, measurement equipment, IoT modules, and for connecting antennas to Wi-Fi and LTE routers.
Availability: brak towaru
250W DC-DC step-up converter 10-50V 5A - step-up voltage power supply
250W step-up voltage converter is an efficient module with smooth adjustment of output voltage 10-50V and current 0.2-6A with supply voltage 9-48V. The device offers efficiency up to 96% and has protection against short circuit and reverse polarity. The module is ideal as a backup power supply, a driver for high-power LEDs, and in DIY projects that need stable, boosted voltage. Compact dimensions make it easy to mount in various electronic assemblies.
Availability: średnia ilość
Dispatched within: 1 day
4-channel 5V 10A relay module low-level triggered 0V Arduino
4-channel relay module is a versatile device powered by 5V DC, allowing safe switching of loads up to 10A. Control is low-level (0V). Built-in optoisolation ensures stable operation with popular microcontrollers such as Arduino and Raspberry Pi.
Each channel has NO and NC contacts and an LED indicating state. The product is well suited to automation projects-lighting, motors, pumps, and heating systems in smart buildings.
Availability: brak towaru
400kV high voltage inverter Tesla coil
High-voltage 400kV inverter Tesla coil - it is sufficient to supply 3-6 V DC at the input to obtain a high voltage value reaching up to 400kV at the output.
Availability: brak towaru
40x10cm GPIO male/female Arduino jumper cables
The set consists of 40 different coloured cables, 10 cm long, with a female connector at one end and a male connector at the other. They can be split as required. They are ideal for connections on contact boards and in start-up kits such as Arduino.
Availability: duża ilość
Dispatched within: 1 day
5 pcs RGB LED 5mm Common Cathode 5x set
RGB LED - emitting virtually any colour of light from the spectrum visible by the human eye.
The diode is transparent.
Availability: brak towaru
5V Low Trig 4 Channel SSR Relay Module
The SSR 5V 4-channel solid-state relay is a module ideal for controlling devices using AVR, ARM, Arduino, STM32, ESP8266 and Raspberry Pi microcontrollers. It features galvanic isolation between input and output. The specification includes 4 relay channels, 5V supply voltage, low state activation and Normal Open type contacts. The maximum load is 2A at 250V AC. This is an excellent tool for prototyping electronic circuits.
Availability: na wyczerpaniu
Dispatched within: 1 day
8 channel SSR relay module 5V Low Trig
The 8-channel module with SSR solid-state relays, powered by 5V with 2A current, is compatible with AVR, ARM, Arduino, STM32. Thanks to the absence of mechanical components, these relays are more reliable for intensive use. Galvanic isolation between input and output provides additional safety. It is an excellent choice for circuit prototyping.
Availability: duża ilość
Dispatched within: 1 day
8-channel 5V 10A relay module low-level triggered 0V for Arduino
8-channel relay module is a universal device for controlling high-power equipment using platforms such as Arduino or Raspberry Pi. It features 8 SONGLE relays powered by 5V DC, supporting loads up to 10A. Control is low-level (0V). Each channel has NO and NC contacts and opto-isolation for circuit safety. The module is ideal for building automation-managing lighting, motors, pumps, and heating systems.
Availability: duża ilość
Dispatched within: 1 day
8-channel Saleae 24 MHz logic analyzer I2C SPI 1-Wire CAN I2S
The compact 8-channel Saleae 24 MHz logic analyzer is a professional tool for working with ARM, AVR, Arduino, or Raspberry Pi microcontrollers. USB-powered, it enables precise signal recording and hardware decoding of communication protocols such as I2C, SPI, 1-Wire, CAN, and I2S.
The analyzer has 8 independent logic inputs with 100K Ohm impedance. It excels at diagnosing communication errors with digital sensors and analysing data transfer in embedded systems.
Availability: duża ilość
Dispatched within: 1 day
9V 6F22 battery connector snap for 6LR61 holders power supply
Practical connector for 9V 6F22 batteries and 6LR61 battery holders. The asymmetrical design of the snap effectively protects circuits against reverse polarity. It features 10-centimeter wires with stripped insulation, ready for soldering or plugging into a breadboard. The product is perfect as a power supply for Arduino, Raspberry Pi, or ESP32 modules. A reliable solution for mobile electronic projects, rapid prototyping, and repairing measuring devices.
Availability: duża ilość
Dispatched within: 1 day
9V battery connector adapter, DC 2.1×5.5 mm plug, snap clip 6F22, 15 cm cable, for Arduino
A practical 9V (6F22) battery adapter connector with a standard DC 2.1×5.5 mm plug and a sturdy snap connector. It enables quick, safe power for electronic circuits, including modules for Arduino, ESP32, and Raspberry Pi, with no soldering required. A flexible 15 cm cable makes installation easy in mobile projects, portable sensors, and educational toys. This compact solution offers secure mounting and versatile use in electronics.
Availability: duża ilość
Dispatched within: 1 day
Adapter N gniazdo N gniazdo do obudowy + uszczelka SEAL przejściówka 50 ohm
This high-quality N-female to N-female adapter from RF Connectors is designed for installation in hermetic SEAL-type enclosures. It ensures a precise fit and excellent transmission performance at 50 ohms impedance, effectively minimizing signal loss in the radio path.
The adapter is used in radio communication systems, base stations, measurement equipment, and amateur radio installations. It features high mechanical durability, and the included sealing O-ring and set of accessories ensure a stable and secure installation.
Availability: na wyczerpaniu
Dispatched within: 1 day
Adapter RS232 DE9 DB9 żeński na terminal block śrubowy D-Sub bezlutowy ARK
A professional RS232 DE9 female to screw terminal adapter enables quick and solderless connection of serial signals. It is equipped with a 9-pin female D-Sub socket and a 9-pin screw terminal block. It features clearly labeled pins on the housing, which minimizes the risk of errors. The product is ideal for service work, diagnostics, and integration of industrial equipment, PLC controllers, and communication converters. It ensures a durable connection and allows repeated wire reconfiguration in automation systems.
Availability: duża ilość
Dispatched within: 1 day
Analog Joystick Module 5V Dual-Axis with Button Arduino AVR Raspberry
Analog Joystick Module 5V is a precise, versatile device with two analog channels (X and Y) and a built-in button. It is ideal for DIY projects, robotics, and prototyping, enabling easy control of movement and position. The module is fully compatible with popular platforms such as Arduino, AVR, Raspberry Pi, and ESP32. It offers simple data readout and convenient integration when powered at 5V.
Availability: duża ilość
Dispatched within: 1 day
Angled Adapter: RP-SMA Male to SMA Female for LoRa Antennas
The RP-SMA to SMA right-angle adapter enables seamless connection between devices equipped with a male RP-SMA connector and a female SMA connector. The right-angle design facilitates cable management in tight spaces and effectively protects cables from kinking.
This adapter is used in Wi-Fi routers, access points, FPV systems in drones, and IoT projects utilizing Arduino, ESP32, or Raspberry Pi modules. It ensures stable signal transmission and simple, tool-free installation.
Availability: duża ilość
Dispatched within: 1 day
Antenna Adapter: SMA Female Socket to TS9 GSM Plug, Gold-Plated
This compact antenna adapter provides a seamless connection from a female SMA socket to a TS9 plug. The gold-plated contacts and housing protect against corrosion and ensure optimal signal quality. The adapter is used in antenna installations and GSM systems, allowing external antennas to be connected to network devices. The direct connector-to-connector design ensures a stable connection and convenient installation in a minimal amount of space without the need for additional cable.
Availability: średnia ilość
Dispatched within: 1 day
Antenna Connector Adapter: SMA Plug to RP-SMA Socket, 50 ohms, Gold-Plated, LoRa FPV
This compact antenna adapter is used to quickly change the connector standard in radio installations. The adapter features an SMA plug and an RP-SMA socket, providing a 50-ohm impedance match. Precision manufacturing, a gold-plated finish, and a Teflon insulator ensure low signal loss and a durable connection.
The adapter is widely used in Wi-Fi routers, access points, SDR receivers, FPV video systems, and industrial telemetry devices.
Availability: na wyczerpaniu
Dispatched within: 1 day
