Seeed Studio

7-pin male connector for XIAO Seeed Studio microcontrollers. 2.54mm pitch. Easy to solder, cut and mount on a contact board. Ideal for a wide range of electronic projects.

Seeedstudio introduces its compact development board, powered by the advanced Nordic nRF52840 ARM Cortex M4 chip, running at 64 MHz. This versatile board provides wireless connectivity through Bluetooth 5.0 with built-in antenna, NFC and ZigBee, enabling innovative projects in the IoT area. It also features a BQ25101 battery charging circuit and a variety of communication interfaces, opening the door to creating mobile, wireless solutions. Additionally, the board is suitable for developing artificial intelligence applications using TinyML, offering a wide range of possibilities for engineers and hobbyists.

Seeedstudio presents a compact board based on the Nordic nRF52840 ARM Cortex M4 processor (64 MHz). With Bluetooth 5.0, NFC and ZigBee, it enables the development of applications using AI and TinyML. Equipped with a 6-axis IMU for gesture recognition and a BQ25101 charging chip, it is the ideal tool for developing mobile wireless solutions.

The Seeed Xiao, the size of a thumb, is based on the ESP32-C3 chip with RISC-V 32-bit architecture, offering 2.4GHz WiFi and Bluetooth 5.0/Mesh - ideal for IoT. It supports Station and SoftAP modes, has 400 kB SRAM and 4 MB Flash, featuring low power consumption.

The kit from Seeedstudio includes the Seeed Xiao ESP32-S3 module and the OV2640 camera. The Xiao ESP32-S3 has a dual-core Xtensa 32-bit LX7 processor running at do 240 MHz, 8 MB PSRAM and 8 MB Flash memory. The module supports WiFi 2.4 GHz, Bluetooth 5.0 and Bluetooth mesh communication. A memory card slotmicroSD card.

The Seeed Xiao, a compact module with an advanced dual-core ESP32-S3 (240 MHz), offers WiFi 2.4 GHz and Bluetooth 5.0. With low power consumption (14 μA in sleep) and a battery charging function, it is ideal for IoT. It has 8 MB PSRAM and 8 MB Flash memory.

A compact Seeedstudio Xiao RP2040 board, powered by a powerful Raspberry Pi RP2040 microcontroller. A dual-core ARM Cortex M0+ running at 133 MHz, programmable in Arduino, MicroPython and CircuitPython. The board offers a variety of interfaces to create a wide range of applications.

A compact module with SAM2D1G18 ARM Cortex M0+ microcontroller, compatible with Arduino. The board offers 14 GPIO connectors, including 11 digital/analogue pins, 10 PWM, DAC, I2C, UART, SPI, SWD. The module's pinouts operate at 3.3 V. The Seeeduino XIAO is powered and programmed via USB type C.

Soldered Seeeduino XIAO module with SAM2D1G18 ARM Cortex M0+ microcontroller, compatible with Arduino. The board has 14 GPIO connectors, including 11 digital/analogue pins, 10 PWM, DAC, I2C, UART, SPI, SWD channels. The pinouts operate at3.3 V. The module is powered and programmed via USB type C.

The Wio Tracker 1110 Dev Board is an advanced development board based on the Wio-WM1110 module that integrates Semtech 's LoRa relay and universal radio for geolocation. It is a user-friendly development platform for LoRa-based tracking.

The Wio-WM1110 Dev Kit from Seeedstudio is an advanced development board, based on the Semtech LR1110 and Nordic nRF52840 modules, designed for versatile IoT and geo-location projects. The module enables long-range LoRaWAN communication, precise GNSS positioning (GPS/BeiDou), as well as WiFi and Bluetooth Low Energy (BLE) connectivity. With support for NFC, Thread and Zigbee technologies, the device allows expansion of functions with additional sensors and interfaces. LoRa and GNSS antennas and a photovoltaic panel are included.