Menu
- Minicomputer(81)
- Microcontroller(89)
- Electronic(531)
- Enclosures(8)
- Cooling(22)
- Sound and acoustics(11)
- Minicomputers(3)
- Memory cards and disks(6)
- Sensors(58)
- Voltage regulators(42)
- Assembly electronics(79)
- Connectors(5)
- Wire(24)
- Contact plates(7)
- Sockets(13)
- PCBs(21)
- Programmers(12)
- Displays and screens(28)
- Buttons and keys(23)
- Starter kits(8)
- Diodes(8)
- Converters(29)
- Power supply(60)
- Gadgets(1)
- LED lighting(12)
- Relays(25)
- GSM modules(4)
- Motor and servo controllers(14)
- Communication(63)
- Tool(28)
- Servo(5)
- Smart Home(2)
- Services(0)
- New products
Vendor
Price
-
from
to
Gniazdo USB-C do zabudowy na panel czarne 4 pinowe panelowe PCB do Arduino
High-quality USB-C panel mount socket with 4-pin PCB connections enables convenient power supply and data transmission in electronic projects. Integrated mounting holes ensure stable fastening in the enclosure and protect the module from mechanical damage.
The product is ideally suited for Arduino, ESP32, ESP8266, and Raspberry Pi microcontrollers. It simplifies routing a communication port to the outside of an enclosure, upgrading equipment, and building custom power supply devices.
Availability: brak towaru
Jumper wires 40 pcs 10 cm female-to-female Arduino Raspberry GPIO
Set of 40 pcs jumper wires 10 cm long with female-to-female connectors. Jumpers enable quick connection of electronic modules without soldering. Compatible with Arduino, Raspberry Pi, ESP8266 and ESP32.
Ideal for prototyping circuits, building communication buses and routing signals from GPIO connectors. Optimal cable length reduces tangling; reusability and easy ribbon separation help keep every project organized.
Availability: duża ilość
Dispatched within: 1 day
Jumper wires 40 pcs 10 cm Male-Male Arduino Raspberry GPIO
Set of 40 male-male jumper wires 10 cm long. Jumpers enable fast prototyping of electronic circuits without soldering. Fully compatible with platforms such as Arduino, Raspberry Pi, ESP8266, and ESP32. The flexible ribbon is easy to separate into individual wires. Ideal for connecting sensor modules and testing GPIO pins on breadboards.
Availability: duża ilość
Dispatched within: 1 day
Jumper wires 40 pcs 20 cm female-to-female Arduino Raspberry GPIO
The set includes 40 jumper wires 20 cm long with female-to-female connectors. The jumpers enable quick connection of modules to controllers and GPIO pins without soldering.
The wires are compatible with Arduino, Raspberry Pi, ESP8266, and ESP32 platforms. They are ideal for connecting sensors, displays, relays, and power supplies in electronic projects.
Availability: duża ilość
Dispatched within: 1 day
Jumper wires cables 40 pcs 20 cm Male-Female Arduino Raspberry GPIO
The set includes 40 pieces of male-female wires 20 cm long. They enable quick connection of modules to controllers without soldering. The jumper wires are ideal for building prototypes and testing electronic circuits.
The wires offer broad compatibility with popular platforms such as Arduino, Raspberry Pi, ESP8266, and ESP32. They work well when connecting sensors, displays, or relays directly to GPIO pins, greatly simplifying and speeding up project assembly.
Availability: duża ilość
Dispatched within: 1 day
Jumper wires cables 40 pcs 20 cm male-male Arduino Raspberry GPIO
The set includes 40 universal jumper wires 20 cm long with male-to-male ends. The jumpers enable instant connection of electronic components without soldering. They are ideal for projects based on Arduino, Raspberry Pi, and ESP8266 and ESP32 modules.
The ribbon can be easily split into individual wires, which helps organize connections. The product is indispensable when connecting sensors, displays, or relays to breadboards and GPIO connectors. It enables convenient, repeatable circuit prototyping.
Availability: duża ilość
Dispatched within: 1 day
Kabel USB-A do USB-C 2.0 1m szybkie ładowanie transfer danych do ESP32
High-quality USB 2.0 A to USB-C cable with a length of 1 meter is designed for fast charging and data transfer. Reinforced plugs and a flexible construction provide high resistance to mechanical damage. The cable is ideal for powering and programming ESP32, Arduino, and Raspberry Pi modules. It is a universal accessory for smartphones, tablets, wireless earbuds, and power banks equipped with a USB-C port.
Availability: duża ilość
Dispatched within: 1 day
Logic analyzer hook clips for Saleae-hook wire leads, 10 pcs
Set of 10 color-coded wires with spring clips is an ideal solution for SALEAE logic analyzers. Each cable is 24 cm long and ends with a female DUPONT connector and an insulated grabber. A strong spring ensures stable contact, while the retractable mechanism minimizes the risk of short circuits.
These wires work very well for measuring digital signals and diagnosing I2C, SPI, and UART buses. The product is compatible with Arduino, Raspberry Pi, ESP8266, and ESP32 platforms, making safe prototyping easier.
Availability: duża ilość
Dispatched within: 1 day
MB-102 white solderless breadboard 830 tie points for Arduino modules, 2.54 mm pitch
The MB-102 solderless breadboard with 830 tie points is an ideal solution for quickly building electronic circuits without soldering. It offers four power rails and works well with popular microcontrollers such as Arduino, Raspberry Pi, and ESP32.
It comes with factory double-sided tape and clips for stable mounting and joining boards into larger working modules. It is widely used in education, sensor testing, and designing circuits for robotics.
Availability: duża ilość
Dispatched within: 1 day
Micro USB socket, micro plug, PCB board, 5-pin, with mounting holes
The compact Micro USB 5 PIN socket on a PCB provides full access to all signal and power lines. The module, measuring 15 x 14 mm, has 3.5 mm mounting holes that ensure mechanical stability. The product is ideal for prototyping electronic circuits, powering microcontrollers at 5V, and repairing damaged ports. Ready solder pads make it easy to integrate with projects based on Arduino, ESP8266, or Raspberry Pi, saving time during assembly.
Availability: średnia ilość
Dispatched within: 1 day
Moduł gniazdo zasilania USB-C na panel czarne z przewodem 10 cm do obudowy
The black USB-C socket module is designed for panel mounting in electronic device enclosures. The connector outputs power only and has factory-soldered wires, eliminating the need for precise soldering and significantly speeding up work.
The product is used in DIY projects with Arduino, ESP32, and Raspberry Pi, as well as for device upgrades, building power supplies, and powering LED lighting.
Availability: średnia ilość
Dispatched within: 1 day
Prototype breadboard 400 tie points Arduino OZY-60 white solderless for 2.54 mm modules
The white OZY-60 solderless prototype breadboard has 400 tie points and two power rails. It enables rapid building and testing of electronic circuits without a soldering iron. The board is compatible with Arduino, Raspberry Pi, ESP8266 and ESP32 microcontrollers. Fitted with double-sided tape and clips for joining modules, it provides stable mounting. It supports a maximum current of 5 A, making it ideal for IoT projects, education and verifying schematics before soldering.
Availability: duża ilość
Dispatched within: 1 day
Prototype PCB board 3x7 cm double-sided 340 holes printed 2.54 mm
High-quality double-sided 3x7 cm PCB with 340 holes and a standard 2.54 mm pitch. Made from solid 1.6 mm thick laminate with plated-through holes, ensuring durability and reliable connections. Perfect for rapid prototyping of electronic circuits and mounting through-hole components. It serves as an excellent base for creating modules for platforms such as Arduino, Raspberry Pi, or ESP32 - without the need to design and etch your own circuits.
Availability: średnia ilość
Dispatched within: 1 day
Prototype PCB board 5×7 cm double-sided 432 holes printed 2.54 mm
Double-sided PCB prototyping board measuring 5×7 cm is an ideal base for building electronic circuits. It has 432 holes on a standard 2.54 mm pitch, which makes mounting through-hole components easy. Made from durable 1.6 mm laminate, it gives your projects a stable foundation.
It is excellent for rapid prototyping and for building modules for Arduino, Raspberry Pi, or ESP32. You can test ideas without etching dedicated printed circuit boards-saving time and making your workflow easier.
Availability: duża ilość
Dispatched within: 1 day
Przewód Kabel USB-C 1m 60W PD 3A w oplocie do Arduino ESP32 czarny USB 2.0
High-quality USB-C to USB-C cable with a length of 1 meter delivers fast charging thanks to support for Power Delivery and Quick Charge standards. Durable nylon braiding and aluminum plugs effectively protect against mechanical damage. The cable is ideal for powering and programming Arduino, ESP32, or Raspberry Pi modules. It also works great for fast charging modern laptops and smartphones, as well as for stable data transfer.
Availability: duża ilość
Dispatched within: 1 day
Set of 600 Resistors 0.25W 30 Values and 20 pcs of Each
A complete set of 600 through-hole resistors rated at 0.25W with a precise 1% tolerance. The pack includes 30 different resistance values, 20 pcs of each. It is an essential workshop item, ideal for prototyping electronic circuits on breadboards. The product works great in projects for Arduino, for ESP32, for ESP8266, and for Raspberry Pi. It enables voltage dividers, LED current limiting, and pull-up/pull-down of signal lines.
Availability: duża ilość
Dispatched within: 1 day
Set of jumpers for prototype breadboards, 140 pcs, jumpers for Arduino
A set of 140 jumper wires for breadboards is the ideal solution for rapid prototyping of electronic circuits. Wires with a 22AWG cross-section and tinned ends ensure reliable connections. They are compatible with Arduino, Raspberry Pi, ESP8266, and ESP32 platforms. The kit includes wires in various lengths from 2.5 mm to 127 mm, making it easier to build neat IoT projects. Everything comes in a practical compartment organizer that simplifies storing and sorting the parts.
Availability: duża ilość
Dispatched within: 1 day
Single-sided prototype PCB board 5x7 cm, 432 holes, 2.54 mm pitch
High-quality single-sided prototype PCB board measuring 5x7 cm with laminate thickness 1.6 mm. Features 432 solder pads on a standard 2.54 mm pitch. Enables rapid prototyping, circuit testing, and building custom expansion modules without having to etch dedicated printed circuits.
The board is fully compatible with Arduino, ESP8266, ESP32, and Raspberry Pi platforms. Offers huge time savings, high mechanical durability, and easy modification of connections in a wide variety of electronic and educational projects.
Availability: duża ilość
Dispatched within: 1 day
