Menu
- Minicomputer(80)
- Microcontroller(76)
- Electronic(464)
- Minicomputers(3)
- Memory cards and disks(6)
- Enclosures(8)
- Cooling(22)
- Sound and acoustics(8)
- Sensors(52)
- Voltage regulators(39)
- Assembly electronics(72)
- Programmers(12)
- Displays and screens(26)
- Buttons and keys(20)
- Starter kits(8)
- Diodes(6)
- Converters(21)
- Power supply(50)
- Gadgets(1)
- LED lighting(12)
- Relays(25)
- GSM modules(3)
- Motor and servo controllers(14)
- Communication(44)
- Tool(25)
- Servo(5)
- Smart Home(2)
- Services(0)
- New products
Vendor
Price
-
from
to
MPU 6050 GY-521 Gyroscope Module 3-Axis Accelerometer for Arduino RC
The GY-521 module with the MPU-6050 chip is a precise sensor combining a 3-axis accelerometer and a 3-axis gyroscope. Powered at 3.3 - 5 V, it communicates over the I2C bus and features very low current consumption. The module is ideal for flight stabilization in drones and RC models, building balancing robots, and camera stabilizers. It is fully compatible with popular microcontrollers such as Arduino and Raspberry Pi, enabling quick prototyping.
Availability: brak towaru
MT3608 DC-DC Step-Up 4-28V 2A - voltage boost converter
The MT3608 DC-DC Step-Up converter module is an efficient solution that boosts voltage from 2-24 V to 5-28 V. The circuit offers a maximum output current of 2 A and high efficiency of 95%. Thanks to its compact size, the module is ideal for small portable projects and IoT systems.
The device works well with popular platforms such as Arduino, Raspberry Pi, and ESP32. It performs excellently when powering sensors, communication modules, and in hobby robotics, allowing you to power circuits from a single Li-Ion cell.
Availability: duża ilość
Dispatched within: 1 day
NE555 pulse generator module, adjustable pulse generator 1 Hz-200 kHz NE555
NE555 Pulse Generator Module is a versatile device that generates square-wave signals in the range from 1 Hz to 200 kHz. It has two potentiometers for precise adjustment of frequency and duty cycle. The module is powered from 5-15 V and works well in projects with Arduino or Raspberry Pi.
Thanks to jumper-selectable operating ranges, the circuit is well suited for testing digital circuits, controlling stepper motors, and generating clock pulses. Its compact design and broad compatibility make it easy to integrate with many electronic systems.
Availability: średnia ilość
Dispatched within: 1 day
NE555 Regulated Arduino Pulse Generator Module
The NE555 Regulated Arduino pulse generator module is a versatile device for hobbyists and professionals. Powered by 5-12V, it offers a single-channel output with adjustable pulse frequency via a potentiometer, reaching a maximum frequency of approximately 1.3 kHz. The output signal voltage is approximately 50% of the input voltage. The module's compact dimensions, 25 x 14 x 15 mm, make it ideal for experiments and DIY projects in electronics and robotics.
Availability: duża ilość
Dispatched within: 1 day
NE555 time-delay relay module 12V 10A
A timer module with an NE555 chip serves as a delay. When it receives power, the NE555 starts counting down the set time and then activates the relay, which remains on until the power is cut. The 12V relay can be adjusted steplessly via a potentiometer between 0-10 seconds. Without power, the relay remains off.
Availability: duża ilość
Dispatched within: 1 day
OMRON 5V Low Trig 2-channel SSR Relay Module
The OMRON SSR 5V 2-channel solid-state relay is a module ideal for controlling devices using AVR, ARM, Arduino, STM32, ESP8266 and Raspberry Pi microcontrollers. It features galvanic isolation between input and output. The specification includes 4 relay channels, 5V supply voltage, low state activation and Normal Open type contacts. The maximum load is 2A at 250V AC. This is an excellent tool for prototyping electronic circuits.
Availability: duża ilość
Dispatched within: 1 day
P31 water liquid level pump sensor, 52 mm float switch, 500 mA
P31 liquid level sensor is a reliable float switch based on a reed switch. The device works seamlessly with platforms such as Arduino or Raspberry Pi. The module supports a maximum voltage of 100V DC and current of 0.5A. The sensor is ideal for monitoring water level in tanks and aquariums, and for protecting pumps against dry running. The kit includes a gasket and a nut, ensuring watertight mounting in a 7.5 mm hole.
Availability: duża ilość
Dispatched within: 1 day
Pigtail 20cm N gniazdo z flanszą SMA-M wtyk RF 50 Ohm kabel RG316 w.cz.
High-quality RF pigtail with RG316 coaxial cable, 20 cm length and 50 Ω impedance. One end has a four-screw N female flange for stable enclosure mounting; the other has a standard SMA male. Ensures reliable transmission with low loss. Ideal for radiocommunication gear, test equipment, IoT modules, and routing antenna connectors on Wi‑Fi and LTE routers.
Availability: średnia ilość
Dispatched within: 1 day
Pigtail BNC wtyk SMA-M męski wtyk RG316 1m 50 Ohm kabel RF złącze antenowe
High-quality RF pigtail with BNC male and SMA male connectors. Flexible, durable RG316 cable, 1 m long with 50 Ohm impedance, ensures stable transmission. Ideal for radio communications modules, professional test gear, network hardware, and GPS receivers. Provides reliable RF interconnects in industrial data links.
Availability: średnia ilość
Dispatched within: 1 day
Pigtail RF U.FL IPX IPEX RP-SMA female jack RG178 15 cm for ESP32 WiFi
High-quality RF pigtail with U.FL (IPX/IPEX) plug and RP-SMA female jack. Uses RG178 coaxial cable 15 cm long with 50 ohm impedance. Provides a stable connection and low signal loss. Ideal for routing the antenna connector outside the device enclosure. Works well with popular modules such as ESP32, ESP8266, Arduino, and Raspberry Pi. Essential in wireless communication systems, WiFi networks, Bluetooth, and IoT projects.
Availability: duża ilość
Dispatched within: 1 day
Pigtail U.FL IPX IPEX SMA-F female jack RG178 10 cm 50 Ω WiFi LoRa
High-quality antenna adapter with an U.FL (IPX/IPEX) connector and female SMA-F jack. It uses RG178 cable, 10 cm long, with 50 Ω impedance, delivering a stable signal in WiFi, LoRa, GSM, and Bluetooth systems.
The product makes it easy to route the antenna outside the enclosure. It is compatible with popular platforms such as ESP8266, ESP32, Arduino, and Raspberry Pi. Its compact size and convenient panel mounting make it ideal for IoT projects and telemetry systems.
Availability: na wyczerpaniu
Dispatched within: 1 day
PIR HC-SR501 adjustable motion detector module, compatible with Arduino and Raspberry Pi
PIR HC-SR501 motion sensor is a reliable module that detects changes in infrared radiation. It features a range of up to 7 meters and a 140-degree field of view. The device is fully compatible with platforms such as Arduino, Raspberry Pi, and ESP32. Thanks to low current consumption and 5-12 V power supply, it is well suited to alarm systems, building automation, and smart lighting. It has adjustable motion indication delay from 5 to 200 seconds.
Availability: duża ilość
Dispatched within: 1 day
Prototype breadboard 400 tie points Arduino OZY-60 white solderless for 2.54 mm modules
The white OZY-60 solderless prototype breadboard has 400 tie points and two power rails. It enables rapid building and testing of electronic circuits without a soldering iron. The board is compatible with Arduino, Raspberry Pi, ESP8266 and ESP32 microcontrollers. Fitted with double-sided tape and clips for joining modules, it provides stable mounting. It supports a maximum current of 5 A, making it ideal for IoT projects, education and verifying schematics before soldering.
Availability: duża ilość
Dispatched within: 1 day
Prototype PCB board 3x7 cm double-sided 340 holes printed 2.54 mm
High-quality double-sided 3x7 cm PCB with 340 holes and a standard 2.54 mm pitch. Made from solid 1.6 mm thick laminate with plated-through holes, ensuring durability and reliable connections. Perfect for rapid prototyping of electronic circuits and mounting through-hole components. It serves as an excellent base for creating modules for platforms such as Arduino, Raspberry Pi, or ESP32 - without the need to design and etch your own circuits.
Availability: duża ilość
Dispatched within: 1 day
Prototype PCB board 5×7 cm double-sided 432 holes printed 2.54 mm
Double-sided PCB prototyping board measuring 5×7 cm is an ideal base for building electronic circuits. It has 432 holes on a standard 2.54 mm pitch, which makes mounting through-hole components easy. Made from durable 1.6 mm laminate, it gives your projects a stable foundation.
It is excellent for rapid prototyping and for building modules for Arduino, Raspberry Pi, or ESP32. You can test ideas without etching dedicated printed circuit boards-saving time and making your workflow easier.
Availability: duża ilość
Dispatched within: 1 day
Przedwzmacniacz stereo equalizer NE5532 XH-M164 moduł audio RCA cinch
High-quality stereo preamplifier with equalizer based on NE5532 integrated circuits. Enables precise tone control of bass, midrange, and treble as well as volume, providing up to 10x signal amplification. Powered by 12-18V AC. Equipped with RCA inputs and convenient screw terminals for easy installation without soldering. The module is ideal for building home audio systems, upgrading older amplifiers, and DIY projects related to audio processing.
Availability: duża ilość
Dispatched within: 1 day
Przetwornica napięcia 1200W 20A DC Step-Up podwyższająca 8-60V na 12-83V
High-performance DC-DC Step-Up converter rated 1200W and 20A. Smooth output voltage adjustment 12V - 83V DC with input 8V - 60V DC. Efficiency up to 95%, with short-circuit protection and deep-discharge protection for the supply.
Reliable in advanced projects. Ideal for LED lighting, battery charging, in-car laptop power, and lab power supplies. Includes a connector for active cooling above 10A.
Availability: duża ilość
Dispatched within: 1 day
Przewód Kabel USB-C 1m 60W PD 3A w oplocie do Arduino ESP32 czarny USB 2.0
High-quality USB-C to USB-C cable with a length of 1 meter delivers fast charging thanks to support for Power Delivery and Quick Charge standards. Durable nylon braiding and aluminum plugs effectively protect against mechanical damage. The cable is ideal for powering and programming Arduino, ESP32, or Raspberry Pi modules. It also works great for fast charging modern laptops and smartphones, as well as for stable data transfer.
Availability: duża ilość
Dispatched within: 1 day
