Menu
- Minicomputer(80)
- Microcontroller(85)
- Electronic(485)
- Tool(25)
- Servo(5)
- Smart Home(2)
- Services(0)
- New products
OMRON 5V Low Trig 2-channel SSR Relay Module
The OMRON SSR 5V 2-channel solid-state relay is a module ideal for controlling devices using AVR, ARM, Arduino, STM32, ESP8266 and Raspberry Pi microcontrollers. It features galvanic isolation between input and output. The specification includes 4 relay channels, 5V supply voltage, low state activation and Normal Open type contacts. The maximum load is 2A at 250V AC. This is an excellent tool for prototyping electronic circuits.
Availability: duża ilość
Dispatched within: 1 day
P31 water liquid level pump sensor, 52 mm float switch, 500 mA
P31 liquid level sensor is a reliable float switch based on a reed switch. The device works seamlessly with platforms such as Arduino or Raspberry Pi. The module supports a maximum voltage of 100V DC and current of 0.5A. The sensor is ideal for monitoring water level in tanks and aquariums, and for protecting pumps against dry running. The kit includes a gasket and a nut, ensuring watertight mounting in a 7.5 mm hole.
Availability: duża ilość
Dispatched within: 1 day
Pigtail 20cm N gniazdo z flanszą SMA-M wtyk RF 50 Ohm kabel RG316 w.cz.
High-quality RF pigtail with RG316 coaxial cable, 20 cm length and 50 Ω impedance. One end has a four-screw N female flange for stable enclosure mounting; the other has a standard SMA male. Ensures reliable transmission with low loss. Ideal for radiocommunication gear, test equipment, IoT modules, and routing antenna connectors on Wi‑Fi and LTE routers.
Availability: średnia ilość
Dispatched within: 1 day
Pigtail BNC wtyk SMA-M męski wtyk RG316 1m 50 Ohm kabel RF złącze antenowe
High-quality RF pigtail with BNC male and SMA male connectors. Flexible, durable RG316 cable, 1 m long with 50 Ohm impedance, ensures stable transmission. Ideal for radio communications modules, professional test gear, network hardware, and GPS receivers. Provides reliable RF interconnects in industrial data links.
Availability: średnia ilość
Dispatched within: 1 day
Pigtail RF U.FL IPX IPEX RP-SMA female jack RG178 15 cm for ESP32 WiFi
High-quality RF pigtail with U.FL (IPX/IPEX) plug and RP-SMA female jack. Uses RG178 coaxial cable 15 cm long with 50 ohm impedance. Provides a stable connection and low signal loss. Ideal for routing the antenna connector outside the device enclosure. Works well with popular modules such as ESP32, ESP8266, Arduino, and Raspberry Pi. Essential in wireless communication systems, WiFi networks, Bluetooth, and IoT projects.
Availability: brak towaru
Pigtail U.FL IPX IPEX SMA-F female jack RG178 10 cm 50 Ω WiFi LoRa
High-quality antenna adapter with an U.FL (IPX/IPEX) connector and female SMA-F jack. It uses RG178 cable, 10 cm long, with 50 Ω impedance, delivering a stable signal in WiFi, LoRa, GSM, and Bluetooth systems.
The product makes it easy to route the antenna outside the enclosure. It is compatible with popular platforms such as ESP8266, ESP32, Arduino, and Raspberry Pi. Its compact size and convenient panel mounting make it ideal for IoT projects and telemetry systems.
Availability: duża ilość
Dispatched within: 1 day
PIR HC-SR501 adjustable motion detector module, compatible with Arduino and Raspberry Pi
PIR HC-SR501 motion sensor is a reliable module that detects changes in infrared radiation. It features a range of up to 7 meters and a 140-degree field of view. The device is fully compatible with platforms such as Arduino, Raspberry Pi, and ESP32. Thanks to low current consumption and 5-12 V power supply, it is well suited to alarm systems, building automation, and smart lighting. It has adjustable motion indication delay from 5 to 200 seconds.
Availability: duża ilość
Dispatched within: 1 day
Prototype breadboard 400 tie points Arduino OZY-60 white solderless for 2.54 mm modules
The white OZY-60 solderless prototype breadboard has 400 tie points and two power rails. It enables rapid building and testing of electronic circuits without a soldering iron. The board is compatible with Arduino, Raspberry Pi, ESP8266 and ESP32 microcontrollers. Fitted with double-sided tape and clips for joining modules, it provides stable mounting. It supports a maximum current of 5 A, making it ideal for IoT projects, education and verifying schematics before soldering.
Availability: duża ilość
Dispatched within: 1 day
Prototype PCB board 3x7 cm double-sided 340 holes printed 2.54 mm
High-quality double-sided 3x7 cm PCB with 340 holes and a standard 2.54 mm pitch. Made from solid 1.6 mm thick laminate with plated-through holes, ensuring durability and reliable connections. Perfect for rapid prototyping of electronic circuits and mounting through-hole components. It serves as an excellent base for creating modules for platforms such as Arduino, Raspberry Pi, or ESP32 - without the need to design and etch your own circuits.
Availability: duża ilość
Dispatched within: 1 day
Prototype PCB board 5×7 cm double-sided 432 holes printed 2.54 mm
Double-sided PCB prototyping board measuring 5×7 cm is an ideal base for building electronic circuits. It has 432 holes on a standard 2.54 mm pitch, which makes mounting through-hole components easy. Made from durable 1.6 mm laminate, it gives your projects a stable foundation.
It is excellent for rapid prototyping and for building modules for Arduino, Raspberry Pi, or ESP32. You can test ideas without etching dedicated printed circuit boards-saving time and making your workflow easier.
Availability: duża ilość
Dispatched within: 1 day
Przedwzmacniacz stereo equalizer NE5532 XH-M164 moduł audio RCA cinch
High-quality stereo preamplifier with equalizer based on NE5532 integrated circuits. Enables precise tone control of bass, midrange, and treble as well as volume, providing up to 10x signal amplification. Powered by 12-18V AC. Equipped with RCA inputs and convenient screw terminals for easy installation without soldering. The module is ideal for building home audio systems, upgrading older amplifiers, and DIY projects related to audio processing.
Availability: duża ilość
Dispatched within: 1 day
Przetwornica napięcia 1200W 20A DC Step-Up podwyższająca 8-60V na 12-83V
High-performance DC-DC Step-Up converter rated 1200W and 20A. Smooth output voltage adjustment 12V - 83V DC with input 8V - 60V DC. Efficiency up to 95%, with short-circuit protection and deep-discharge protection for the supply.
Reliable in advanced projects. Ideal for LED lighting, battery charging, in-car laptop power, and lab power supplies. Includes a connector for active cooling above 10A.
Availability: duża ilość
Dispatched within: 1 day
Przetwornica Step-Up DC-DC z 2.5V na 5V 8V 9V 12V - podwyższająca napięcie
Compact DC-DC step-up voltage converter converting input power in the range 2.5V - 12V to stable output: 5V, 8V, 9V, or 12V. Voltage setting is done using convenient jumpers. The module delivers up to 6W of power and features an indicator LED.
The device works great for powering logic circuits from Li-Ion cells and stepping up voltage from USB 5V. It is an excellent choice for projects compatible with Arduino, ESP32, and Raspberry Pi platforms, providing easy configuration and stable operating parameters.
Availability: duża ilość
Dispatched within: 1 day
Przewód Kabel USB-C 1m 60W PD 3A w oplocie do Arduino ESP32 czarny USB 2.0
High-quality USB-C to USB-C cable with a length of 1 meter delivers fast charging thanks to support for Power Delivery and Quick Charge standards. Durable nylon braiding and aluminum plugs effectively protect against mechanical damage. The cable is ideal for powering and programming Arduino, ESP32, or Raspberry Pi modules. It also works great for fast charging modern laptops and smartphones, as well as for stable data transfer.
Availability: duża ilość
Dispatched within: 1 day
PT100 temperature sensor thermocouple probe cable 0.5 m -50 +450 thermostat
Precise PT100 temperature sensor in the form of a probe with a 0.5 m cable. The probe enables measurements over a very wide range from -50°C to +450°C, and its compact dimensions 30 mm x 4 mm make installation in tight spaces easier.
The product offers high precision and stability. It is ideal for building thermostats, weather stations, and industrial automation systems. It works excellently with popular platforms such as Arduino, ESP8266, ESP32, and Raspberry Pi.
Availability: duża ilość
Dispatched within: 1 day
PT1000 Temperature sensor Thermocouple probe cable 0.5 m -50 +450 thermostat
Precise PT1000 temperature sensor with a 0.5 m cable. The measuring probe supports an extreme range from -50°C to +450°C, while the cable is rated up to +200°C. Compact dimensions of 30 x 4 mm and a weight of 3 g make installation easy. The product works seamlessly with Arduino, ESP8266, ESP32, and Raspberry Pi. Ideal for automation systems, monitoring heating processes, and projects that demand high stability and measurement accuracy.
Availability: duża ilość
Dispatched within: 1 day
PWM driver module - 400W 15A 36V - MOSFET HW-517 ESP for Arduino Raspberry
High-performance MOSFET PWM driver HW-517 enables precise control of direct current in the range 5V - 36V DC. The module offers high current capability up to 15A and maximum power 400W. The device is compatible with platforms such as Arduino, Raspberry Pi, and ESP32.
It works excellently for smooth speed regulation of DC motors, brightness control of LED lighting, and control of pumps and fans. Compact dimensions and direct compatibility with 3.3V and 5V logic facilitate integration in automation projects.
Availability: duża ilość
Dispatched within: 1 day
PWM signal generator LCD display LPWM XY
The PWM signal generator display LCD LPWM XY is used in the creation of rectangular waveforms. In addition, it is useful for diagnosing electronics, controlling DC motors, lighting and generating a clock for microcontrollers. It features four pushbuttons for adjusting the frequency and fill of the PWM signal, holes for pins (rastr 2.54 mm) for voltage connection and signal output. It has an easy-to-read LCD display showing frequency in four modes up to 150 kHz.
Availability: brak towaru
